Features and benefits
EVO-STIK GRIPFILL is a multi-purpose, high-strength gap filling adhesive. It’s suitable for interior and exterior use (provided the bond is covered) and is specially formulated to stick a wide range of building materials including wood, plasterboard, tiles, stone, metal, breeze blocks, bricks, ceramic, concrete, UPVC and more. Thanks to its gap filling qualities, it can even be used on uneven surfaces.
Suitable materials: Wood, plasterboard, tiles, stone, metal, breeze blocks, bricks, ceramic, concrete, UPVC and more.
Sizes: C20 and C30 cartridge.
Coverage: Approx. 11m of a 6mm diameter bead per C20 cartridge, or 12m of a 6mm diameter bead per C30 cartridge.
Frequently Asked Questions
In general a 6mm bead at 20°c will take 24hrs to be at its strongest. However, EVO-STIK GRIPFILL cures by the evaporation of the solvent and curing times will be affected by how thick the product is applied, the ambient temperature and the surfaces it is applied to.
For best results, apply a 6mm diameter ‘zig-zag’ bead along the length of the surface to be bonded. Where two impervious materials are to be bonded, apply EVO-STIK GRIPFILL as above, press firmly together and break the bond pulling away immediately ensuring good transfer has occurred. Wait for approximately 10 seconds and re-bond the two materials.
Uncured adhesive can be removed using EVO-STIK Gripfilth Wipes, after carefully scraping off the bulk. Cured adhesive can only be mechanically removed (i.e. by cutting, sanding, scraping).