Gripfill

Available colours
Buff
Colour indications are a guide only
Features and benefits

Features and benefits

Will bond most building materials
Superior final bond strength
Suitable for interior and exterior use
interior
Exterior

EVO-STIK GRIPFILL is a multi-purpose, high-strength gap filling adhesive.

It’s suitable for interior and exterior use (provided the bond is covered) and is specially formulated to stick a wide range of building materials including wood, plasterboard, tiles, stone, metal, breeze blocks, bricks, ceramic, concrete, UPVC and more.

Thanks to its gap filling qualities, GRIPFILL can even be used on uneven surfaces.

Suitable materials:

Wood, plasterboard, tiles, stone, metal, breeze blocks, bricks, ceramic, concrete, UPVC and more

Sizes: C20 and C30 cartridge

Coverage: Approx. 11m of a 6mm diameter bead per C20 cartridge, or 12m of a 6mm diameter bead per C30 cartridge

 


Frequently Asked Questions

In general a 6mm bead at 20°c will take 24hrs to be at its strongest. However, GRIPFILL cures by the evaporation of the solvent and curing times will be affected by how thick the product is applied, the ambient temperature and the surfaces it is applied too.

For best results, apply a 6mm diameter ‘zig-zag’ bead along the length of the surface to be bonded. Where two impervious materials are to be bonded, apply GRIPFILL as above, press firmly together and break the bond pulling away immediately ensuring good transfer has occurred. Wait for approximately 10 seconds and re-bond the two materials.

Uncured adhesive can be removed using Grip Filth wipes, after carefully scraping off the bulk. Cured adhesive can only be mechanically removed i.e. cutting, sanding, scraping.

DOCUMENTATION

Technical Data Sheets

Safety Data Sheets

The Safety Data Sheet for this product is available on an external website. Follow the link to download.