Search

If you can not find the information you need on our website, please get in touch

Results

76 new results
default image

Can I use Wood Glue Interior outside?

No. EVO-STIK Wood Glue Interior is designed for indoor use only. For outdoor applications, use EVO-STIK Wood Glue Exterior, which is suitable for both interior and exterior use.
default image

How long does 528 Instant Contact Adhesive take to dry?

EVO-STIK 528 Instant Contact Adhesive is touch dry within 10 to 20 minutes and reaches full bond strength within 24 to 48 hours.
default image

Can I use 528 Instant Contact Adhesive on polystyrene or on cellulose painted surfaces?

No. EVO-STIK 528 Instant Contact Adhesive is not suitable for use on polystyrene or cellulose-painted surfaces.
default image

How long does Building Silicone Sealant take to dry?

EVO-STIK Building Silicone Sealant forms a skin in approximately 10 to 20 minutes, depending on bead width, temperature and humidity. It cures at a rate of around 2 to 3mm per 24 hours.
default image

How do I remove excess sealant or adhesive?

If the sealant or adhesive is uncured, carefully remove the bulk using a soft scraper. Any remaining residue can be removed using EVO-STIK Grip Filth Wipes. If the product has cured, carefully cut…
default image

How long does Carpet Adhesive take to dry?

EVO-STIK Carpet Adhesive remains wet for approximately 15 to 25 minutes after application. Check that the floor covering is securely bedded down after 2 hours.
default image

What is Contractors PVA used for?

EVO-STIK Contractors PVA is used to prepare porous surfaces for plastering by reducing suction, sealing dust and improving adhesion. It can also be applied neat as a tack coat to help new plaster…
default image

Do I need to PVA a painted wall before plastering?

Only if the paint is firmly bonded. EVO-STIK Contractors PVA should not be applied over loose, flaking or poorly adhered paint, as this can prevent the new plaster from bonding properly. If the paint…
default image

How many coats of Contractors PVA should I use before plastering?

For porous surfaces, apply one diluted coat of EVO-STIK Contractors PVA to prime the surface, followed by one neat coat just before plastering. The neat coat should remain tacky when the plaster is…
default image

How long should I leave Contractors PVA before plastering?

Allow the diluted primer coat of EVO-STIK Contractors PVA to dry completely. The neat bonding coat should be plastered over while still tacky and must not be allowed to dry. Depending on temperature,…

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

Product finder