How long should I leave Contractors PVA before plastering?
Allow the diluted primer coat of EVO-STIK Contractors PVA to dry completely. The neat bonding coat should be plastered over while still tacky and must not be allowed to dry. Depending on temperature,…
What happens if I don't use Contractors PVA before plastering?
On porous surfaces, plaster can dry too quickly and unevenly, which may weaken adhesion and increase the risk of cracking. EVO-STIK Contractors PVA helps regulate suction and stabilise dusty surfaces…
How long should I wait before painting over Decorators Caulk?
Wait until EVO-STIK Decorators Caulk has fully dried before painting. Drying can take between 1 and 24 hours, depending on the depth of the caulk, temperature and humidity.
How should I store Expanding Foam Filler?
Always store EVO-STIK Expanding Foam Filler upright in a safe place where the can cannot be knocked over or accidentally damaged.
How long before Expanding Foam Filler can be cut?
EVO-STIK Expanding Foam Filler can be cut after approximately 20 minutes when applied as a 20mm bead.
How long before I can walk on the floor?
Allow a minimum of 24 hours before subjecting the floor covering to foot traffic.
Can Flooring Adhesive be used on uneven floors?
No. Uneven concrete floors should first be levelled and smoothed using a suitable floor levelling compound before applying EVO-STIK Flooring Adhesive. Very porous floors should also be primed before…
How long does Frame Silicone Sealant take to dry?
EVO-STIK Frame Silicone Sealant forms a skin in approximately 10 to 20 minutes, depending on bead width, temperature and humidity. It cures at a rate of around 2 to 3mm per 24 hours.
How long do I have to tool Frame Silicone Sealant?
EVO-STIK Frame Silicone Sealant should be tooled within 10 minutes of application.
Can Frame Silicone Sealant be used on floors?
No. EVO-STIK Frame Silicone Sealant is not suitable for use in floor movement joints, as it can be subject to abrasion from foot traffic.