Polyurethane Wood Glue
EVO-STIK Polyurethane Wood Glue is a fast-setting, high-strength wood adhesive that dries to form a bond stronger than the wood itself. It's ideal for bonding all types of wood with a quick-drying formulation that allows joints to be carefully handled in as little as 5 minutes
Amber
Features and benefits
This polyurethane wood adhesive is also suitable for hard, porous surfaces such as concrete, plaster and brick, as well as non-porous surfaces such as metals, foamed polystyrene, GRP and PVC.
Due to the excellent water resistance of EVO-STIK PU Wood Glue, it’s suitable for both interior and exterior use, providing a reliable bond that is long-lasting. Plus, once dry, it can also be sanded and painted.
Suitable materials: All wood types including softwood, hardwood, chipboard, plywood, and block wood.
Fast-setting polyurethane wood adhesive - sets in as little as 5 minutes
Suitable for all wood types
Bonds many rigid, porous and non-porous surfaces
Can be sanded, stained & painted
Gap filling for uneven surfaces
Waterproof poly wood glue
Complies with EN204 type D4 ideal for indoor and outdoor jobs
Suitable for interior and exterior use
Downloads & resources
Polyurethane Wood Glue - Technical Data Sheet (455.08 KB)
This file is stored on an external website, please follow the link
How to use
Please note: EVO-STIK Polyurethane Wood Glue must only be used when one of the surfaces to be bonded is porous.
Preparation
- Surfaces must be clean and free from any loose material or contamination such as grease etc.
- Non-porous surfaces should be abraded to give a good key and porous surfaces should be moistened with water.
Application
- Apply thin beads to one of the surfaces and then carefully press the two together.
- Lightly clamp the substrates to produce a thin bond line.
- In good conditions, the bond can be lightly handled after 5 minutes. Full cure will be achieved in about 24hrs at 25 degrees Celsius. For full drying times, see the TDS.
How to remove
Removal of PU wood adhesive is extremely difficult even when it is uncured. It is advisable to protect any vulnerable surfaces.
Uncured adhesive: Carefully scrape up excess adhesive and then remove the remains using acetone. It will be almost impossible to remove the uncured adhesive from cloths and porous or rough surfaces.
Cured adhesive: This can only be removed mechanically. The best time is when it has just cured.
FAQs
Can Polyurethane Wood Glue be used on non-porous surfaces?
EVO-STIK Polyurethane Wood Glue should only be used where at least one of the surfaces being bonded is porous. Non-porous surfaces should be abraded first to provide a good key for adhesion.
How do I remove cured adhesive?
Cured adhesive can only be removed mechanically. Removal is easiest when the adhesive has just cured. To help avoid damage and reduce clean-up time, protect any vulnerable surfaces before application.
What is PU Wood Glue?
EVO-STIK PU Wood Glue is a one-part, moisture-curing polyurethane adhesive designed for bonding wood and a wide range of other materials.
Its thixotropic, non-drip formulation makes it particularly suitable for vertical and overhead applications, including mortise and tenon joints. The high-strength adhesive offers excellent water resistance and cures rapidly, allowing bonded joints to be handled carefully after as little as 5 minutes in some applications.
EVO-STIK PU Wood Glue bonds most wood and many other rigid porous materials, including concrete, plaster and brick, as well as non-porous materials such as metals, foamed polystyrene, GRP and PVC. For successful bonding, at least one of the surfaces must be porous.
Wood Glue Exterior
Wood Glue Interior
Find new, smarter ways of doing things
Find out what product you need, how to use it and where to buy it.
PRODUCT FINDER