Search

If you can not find the information you need on our website, please get in touch

Results

77 new results
default image

What happens if I don't use Contractors PVA before plastering?

On porous surfaces, plaster can dry too quickly and unevenly, which may weaken adhesion and increase the risk of cracking. EVO-STIK Contractors PVA helps regulate suction and stabilise dusty surfaces…
default image

How long should I wait before painting over Decorators Caulk?

Wait until EVO-STIK Decorators Caulk has fully dried before painting. Drying can take between 1 and 24 hours, depending on the depth of the caulk, temperature and humidity.
default image

How should I store Expanding Foam Filler?

Always store EVO-STIK Expanding Foam Filler upright in a safe place where the can cannot be knocked over or accidentally damaged.
default image

How long before Expanding Foam Filler can be cut?

EVO-STIK Expanding Foam Filler can be cut after approximately 20 minutes when applied as a 20mm bead.
default image

How long before I can walk on the floor?

Allow a minimum of 24 hours before subjecting the floor covering to foot traffic.
default image

Can Flooring Adhesive be used on uneven floors?

No. Uneven concrete floors should first be levelled and smoothed using a suitable floor levelling compound before applying EVO-STIK Flooring Adhesive. Very porous floors should also be primed before…
default image

How long does Frame Silicone Sealant take to dry?

EVO-STIK Frame Silicone Sealant forms a skin in approximately 10 to 20 minutes, depending on bead width, temperature and humidity. It cures at a rate of around 2 to 3mm per 24 hours.
default image

How long do I have to tool Frame Silicone Sealant?

EVO-STIK Frame Silicone Sealant should be tooled within 10 minutes of application.
default image

Can Frame Silicone Sealant be used on floors?

No. EVO-STIK Frame Silicone Sealant is not suitable for use in floor movement joints, as it can be subject to abrasion from foot traffic.
default image

How long does GRIPFILL™ take to dry?

A 6mm bead of EVO-STIK GRIPFILL™ will typically reach maximum strength within 24 hours at 20°C. As GRIPFILL™ cures through solvent evaporation, drying times will vary depending on the bead thickness,…

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

Product finder