Search

If you can not find the information you need on our website, please get in touch

Results

80 new results
default image

Why do I need to clamp wood bonds?

Until the adhesive has set, it has little bond strength. As EVO-STIK Wood Glue Interior dries, water evaporates from the adhesive, which can cause slight shrinkage and may also swell the wood grain…
default image

How long does Wood Glue Interior take to dry?

EVO-STIK Wood Glue Interior reaches full cure within 24 hours at 20°C.The time required to develop full bond strength depends on factors such as temperature, humidity, bonding pressure, and the type,…
default image

What is the open time for Wood Glue Interior?

The open assembly time for EVO-STIK Wood Glue Interior depends on the porosity of the surfaces being bonded and the ambient temperature. Typically, it is between 5 and 10 minutes.
default image

How do I clean the nozzle on Wood Glue Interior?

To clean the nozzle on EVO-STIK Wood Glue Interior, first close the bottle and wipe away any excess glue with a clean, damp cloth.If the nozzle becomes blocked with dried glue, unscrew and remove the…
default image

Can I use Wood Glue Interior outside?

No. EVO-STIK Wood Glue Interior is designed for indoor use only. For outdoor applications, use EVO-STIK Wood Glue Exterior, which is suitable for both interior and exterior use.
default image

How long does 528 Instant Contact Adhesive take to dry?

EVO-STIK 528 Instant Contact Adhesive is touch dry within 10 to 20 minutes and reaches full bond strength within 24 to 48 hours.
default image

Can I use 528 Instant Contact Adhesive on polystyrene or on cellulose painted surfaces?

No. EVO-STIK 528 Instant Contact Adhesive is not suitable for use on polystyrene or cellulose-painted surfaces.
default image

How long does Building Silicone Sealant take to dry?

EVO-STIK Building Silicone Sealant forms a skin in approximately 10 to 20 minutes, depending on bead width, temperature and humidity. It cures at a rate of around 2 to 3mm per 24 hours.
default image

How do I remove excess sealant or adhesive?

If the sealant or adhesive is uncured, carefully remove the bulk using a soft scraper. Any remaining residue can be removed using EVO-STIK Grip Filth Wipes. If the product has cured, carefully cut…
default image

How long does Carpet Adhesive take to dry?

EVO-STIK Carpet Adhesive remains wet for approximately 15 to 25 minutes after application. Check that the floor covering is securely bedded down after 2 hours.

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

Product finder