Search

If you can not find the information you need on our website, please get in touch

Results

85 new results
default image

How long does GRIPFILL™ take to dry?

A 6mm bead of EVO-STIK GRIPFILL™ will typically reach maximum strength within 24 hours at 20°C. As GRIPFILL™ cures through solvent evaporation, drying times will vary depending on the bead thickness,…
default image

How do I apply GRIPFILL™?

For best results, apply EVO-STIK GRIPFILL™ in a 6mm zig-zag bead along the length of the surface to be bonded. When bonding two impervious surfaces, apply the adhesive, press the surfaces firmly…
default image

How long does GRIPFILL™ Solvent-Free take to dry?

EVO-STIK GRIPFILL™ Solvent-Free typically dries in approximately 24 hours, depending on drying conditions, the porosity of the surfaces, and the thickness of the adhesive layer. Thicker applications…
default image

Can I use GRIPFILL™ Solvent-Free on mirrors?

No. We do not recommend using EVO-STIK GRIPFILL™ Solvent-Free to bond mirrors, as it may cause an adverse reaction with the mirror backing.
default image

Can I use GRIPFILL™ Solvent-Free as a filler?

No. EVO-STIK GRIPFILL™ Solvent-Free is an adhesive with some gap-filling properties, but it is not designed to be used as a filler. When used in thick filling applications, it may crack as it dries…
default image

What is the difference between GRIPFILL™ XTRA and GRIPFILL™?

EVO-STIK GRIPFILL™ XTRA offers all the benefits of EVO-STIK GRIPFILL™, but has been specially formulated to minimise slippage and provide a stronger bond over time. Its instant grab helps bond a wide…
default image

How do I prepare porous surfaces for GRIPFILL™ XTRA?

Porous surfaces, such as plaster and fibre cement board, should be primed with Bostik PVA diluted 1:5 with clean water and allowed to dry thoroughly before applying EVO-STIK GRIPFILL™ XTRA.
default image

Can I use GRIPFILL™ XTRA in wet conditions?

Yes, EVO-STIK GRIPFILL™ XTRA can be used externally, but the adhesive must be protected from driving rain, ponding water and permanently wet conditions.
default image

How long do I have to use Lead & Gutter Silicone Sealant after application?

EVO-STIK Lead & Gutter Silicone Sealant skins over in approximately 20 minutes and should be tooled within 5 minutes of application.
default image

Is Linseed Oil Putty suitable for double glazing?

No. EVO-STIK Linseed Oil Putty Natural is not suitable for use with insulated glass units (double glazing) or heat-absorbing glass.

Find new, smarter ways of doing things

Find out what product you need, how to use it and where to buy it.

Product finder